LOCATION=authoring
#
# Add other locations and move target differences into the macros as needed
#
CC=g++
Cc=gcc

#---------------------------------------------------------------
# To build apig-cli, you must first build an XMLRPC entabled 
# cliever and put it in operation at URL below because part
# of the generic core client generated using xml-rpc-api2cpp.
#--------------------------------------------------------------
CD_URL= http://localhost:4243/RPC2
#---------------------------------------------------------------
# You can build just CD without XMLRPC by leaving the DEF, LIB 
# INCL variables out. Otherwise set them from xmlrpc-c-config.
#--------------------------------------------------------------
##### Set this to the location of the executables/objects to be produced

BUILD_OBJ_DIR = build

BOSTLIB=-L/usr/lib/boost
BOSINCL=-L/usr/include/boost
LOG4LIB=-L/usr/lib

#DEF_XML_RPC=-DXMLRPC_C
#XMLRPC_INCL=-I/usr/include/xmlrpc-c
#XMLRPC_LIB=-I/usr/lib

CLIENT=drde
 
SLIBS= -L/usr/lib $(BOSTLIB) $(LOG4LIB) -l boost_system -l boost_thread -l log4cpp -l ncurses

ifeq ($(LOCATION),authoring)
SINCL= -I include -I ../AusRegCliever/include -I /usr/include/log4cpp  $(BOSINCL)
CSINCL= -I include -I ../AusRegCliever/include -I /usr/include/log4cpp  $(BOSINCL) /usr/include/xsd/cxx /usr/local/include/xercesc
CFLAGS= -DCURRENT_DEBUG=1000  -ggdb3
RESOURCES=../../resources
endif

CLIBS= -L$(USRLIB) 

CLFLAGS= -Wall -Wundef -Wpointer-arith -Wshadow \
	 -Wcast-align -Winline -Wmissing-declarations -Wredundant-decls \
	 -Wmissing-prototypes -Wnested-externs \
	 -Wstrict-prototypes -Waggregate-return -Wno-implicit
	 
ACOBJS= build/cliever.o build/cdLogger.o build/clientDaemonConfig.o \
	 build/clientDaemon.o   build/commander.o build/mdBehavior.o

EPPOBJS= build/epp-1.0.o	build/eppcom-1.0.o build/registrant-1.0.o \
		 build/domain-1.0.o build/host-1.0.o  build/contact-1.0.o


# --- targets
#

ifeq ($(LOCATION),authoring)
all:    cliever ausreg-cd
endif

cliever: build/$(CLIENT)-cd

ausreg-cd: build/ausreg-cd 

.c.o:
	$(Cc) -c $(CLFLAGS) -o  $<
	
#
# xmlrpc utils will create the following by reflection from a running cliever.
#  this is only needed for APIG, 
#	
	
client/mdClientBehavior.cpp:
	xml-rpc-api2cpp $(CD_URL) "behavior" mdClientBehavior    >client/mdClientBehavior 
	after   client/mdClientBehavior mdClientBehavior\.cc >client/mdClientBehavior.cpp
	before  client/mdClientBehavior mdClientBehavior\.cc >include/mdClientBehavior.h
	rm src/client/mdClientBehavior

client/mdClientDevice.cpp:
	xml-rpc-api2cpp $(CD_URL) "device" mdClientDevice     >client/mdClientDevice 
	after   client/mdClientDevice mdClientDevice\.cc  >client/mdClientDevice.cpp
	before  client/mdClientDevice mdClientDevice\.cc  >include/mdClientDevice.h
	rm src/client/mdClientDevice 

client/mdClientState.cpp:
	xml-rpc-api2cpp $(CD_URL) "state" mdClientState    >client/mdClientState 
	bin/after   client/mdClientState mdClientState\.cc >client/mdClientState.cpp
	bin/before  client/mdClientState mdClientState\.cc >include/mdClientState.h
	rm src/client/mdClientState
	
client/epp-1.0.cpp: $(RESOURCES)/epp-1.0.xsd 
	xsd cxx-parser $(RESOURCES)/epp-1.0.xsd 
	mv epp-1.0-pskel.cxx client/epp-1.0.cpp 
	mv epp-1.0-pskel.hxx include/epp-1.0.hpp 
		
client/eppcom-1.0.cpp: $(RESOURCES)/eppcom-1.0.xsd 
	xsd cxx-parser $(RESOURCES)/eppcom-1.0.xsd 
	mv eppcom-1.0-pskel.cxx client/eppcom-1.0.cpp 
	mv eppcom-1.0-pskel.hxx include/eppcom-1.0.hpp 	
	
client/host-1.0.cpp: $(RESOURCES)/host-1.0.xsd 
	xsd cxx-parser $(RESOURCES)/host-1.0.xsd 
	mv host-1.0-pskel.cxx client/host-1.0.cpp 
	mv host-1.0-pskel.hxx include/host-1.0.hpp 	
	
client/domain-1.0.cpp: $(RESOURCES)/domain-1.0.xsd 
	xsd cxx-parser $(RESOURCES)/domain-1.0.xsd 
	mv domain-1.0-pskel.cxx client/domain-1.0.cpp 
	mv domain-1.0-pskel.hxx include/domain-1.0.hpp 	
	
client/registrant-1.0.cpp: $(RESOURCES)/registrant-1.0.xsd 
	xsd cxx-parser $(RESOURCES)/registrant-1.0.xsd 
	mv registrant-1.0-pskel.cxx client/registrant-1.0.cpp 
	mv registrant-1.0-pskel.hxx include/registrant-1.0.hpp 	
	
client/contact-1.0.cpp: $(RESOURCES)/contact-1.0.xsd 
	xsd cxx-parser $(RESOURCES)/contact-1.0.xsd 
	mv contact-1.0-pskel.cxx client/contact-1.0.cpp 
	mv contact-1.0-pskel.hxx include/contact-1.0.hpp 	
	
build/epp-1.0.o:
	$(CC) $(CFLAGS) client/epp-1.0.cpp -c -o build/epp-1.0.o $(CSINCL)
	
build/eppcom-1.0.o:
	$(CC) $(CFLAGS) client/eppcom-1.0.cpp -c -o build/eppcom-1.0.o $(CSINCL)
	
build/host-1.0.o:
	$(CC) $(CFLAGS) client/host-1.0.cpp -c -o build/host-1.0.o $(CSINCL)
	
build/domain-1.0.o:
	$(CC) $(CFLAGS) client/domain-1.0.cpp -c -o build/domain-1.0.o $(CSINCL)
	
build/registrant-1.0.o:
	$(CC) $(CFLAGS) client/registrant-1.0.cpp -c -o build/registrant-1.0.o $(CSINCL)
	
build/contact-1.0.o:
	$(CC) $(CFLAGS) client/contact-1.0.cpp -c -o build/contact-1.0.o $(CSINCL)
	
build/cdLogger.o: client/cdLogger.cpp include/cdLogger.h 
	$(CC) $(CFLAGS) client/cdLogger.cpp -c -o build/cdLogger.o $(SINCL)
	
build/cliever.o: client/ausreg-cd.cpp include/ausreg-cd.h
	$(CC) $(CFLAGS) client/ausreg-cd.cpp -c -o build/cliever.o $(SINCL) $(DEF_XML_RPC) $(XMLRPC_INCL)

build/clientDaemonConfig.o: client/clientDaemonConfig.cpp include/clientDaemonConfig.h
	$(CC) $(CFLAGS) client/clientDaemonConfig.cpp -c -o build/clientDaemonConfig.o $(SINCL)
	
build/clientDaemon.o: client/clientDaemon.cpp include/clientDaemon.h
	$(CC) $(CFLAGS) client/clientDaemon.cpp -c -o build/clientDaemon.o $(SINCL)

build/mdBehavior.o: client/mdBehavior.cpp include/mdBehavior.h
	$(CC) $(CFLAGS) client/mdBehavior.cpp $(SINCL) -c -o build/mdBehavior.o
	
build/commander.o: client/commander.cpp include/mdCommander.h include/eppargs.h
	$(CC) $(CFLAGS) client/commander.cpp $(SINCL) -c -o build/commander.o
	
build/$(CLIENT)-cd: $(ACOBJS)
	$(CC) $(CFLAGS) -o build/$(CLIENT)-cd $(SINCL) $(LIBS) $(ACOBJS) $(SLIBS) $(XMLRPC_LIB) 
	
build/ausreg-cd: $(ACOBJS) $(EPPOBJS)
	$(CC) $(CFLAGS) -o build/ausreg-cd $(SINCL) $(LIBS) $(ACOBJS) $(EPPOBJS) $(SLIBS) $(XMLRPC_LIB) 
	
build/apig-cli: build/mdClientBehavior.o build/mdClientState.o build/mdClientDevice.o \
 	build/tools.o build/coretestbucket.o client/apig-cli.cpp 
	$(CC) $(CFLAGS) client/apig-cli.cpp $(CLIBS) $(CINCL) -o build/apig-cli build/tools.o build/coretestbucket.o \
	build/mdClientBehavior.o build/mdClientState.o build/mdClientDevice.o $(XMLRPC_LIB) 
	
doxygen/index.html: etc/doxygen.config
	doxygen etc/doxygen.config 

# --- rebuild on copy to a new host
#distclean:
#	clrbak
#	rm -rf build
#	rm -rf doxygen
#	mkdir doxygen
#	mkdir build
#	touch etc/doxygen.config


.PHONY: ausreg_cd
ausreg_cd: build/$(CLIENT)-cd

.PHONY: dirs
dirs:
	-mkdir -p $(BUILD_LIB_DIR)
		
clean:
	clrbak
	find ./build -name "*.o"   -print | perl -ne "print;chop;unlink"
	find ./build -name "*.rpo" -print | perl -ne "print;chop;unlink"
	rm build/$(CLIENT)-cd
	
skeleton:
	clrbak
	find ./build -name "*.o"   -print | perl -ne "print;chop;unlink"
	find ./build -name "*.rpo" -print | perl -ne "print;chop;unlink"
	rm client/*-1.0.cpp
	rm include/*-1.0.hpp
	rm build/$(CLIENT)-cd